- Out of stock
HyperX Fury Black 8GB, DDR4, 2666MHz (PC4-21330), CL16, XMP, DIMM Memory
£41.43
VAT included
HyperX HX424C12SB2K2/16 is a kit of two 1G x 64-bit (8GB) DDR4-2400 CL12 SDRAM (Synchronous DRAM) 2Rx8, memory modules, based on sixteen 512M x 8-bit FBGA components per module. Total kit capacity is 16GB. Each module supports Intel® XMP (Extreme Memory Profiles). Each module has been tested to run at DDR4-2400 at a low latency timing of 12-14-14 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP - 2.5V Typical
- VDDSPD = 2.25V to 3.6V
- On-Die termination (ODT)
- 16 internal banks; 4 groups of 4 banks each
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Height 1.36” (34.57mm)
Unleash your style. Unleash your FURY.
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP - 2.5V Typical
- VDDSPD = 2.25V to 3.6V
- On-Die termination (ODT)
- 16 internal banks; 4 groups of 4 banks each
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Height 1.36” (34.57mm)
Updated low-profile heat spreader
The sleek-looking new heat spreader is a great upgrade for your battle station’s style.
High-performance, cost-effective upgrade
HyperX FURY DDR4 is the perfect choice for a system builder, or someone looking for an upgrade to jumpstart their sluggish system.
Intel XMP-Ready
Our engineers have predefined Intel Extreme Memory Profiles designed to maximize the performance of our memory modules.
Plug N Play
A simple and easy Plug N Play upgrade, HyperX FURY DDR4 will auto-overclock itself to the highest listed speed allowed by the system BIOS.
HX426C16FB2/8
Data sheet
- Warranty
- Lifetime
- DDR Type
- DDR4
- Package Type
- Retail
- Package Weight
- 0.0225 kg
- Heatsink
- Yes
- Series
- Kingston HyperX Fury
- Size
- 8GB
- Speed
- 2666 MHz
- Compliance
- PC4-21330
- Pins
- 288-pin
- CAS Latency
- CL16
- Data Integrity Check
- Non-ECC
- Low Voltage
- No
- Voltage
- 1.2V Typical
- Additional Information
- See Overview
- Timings
- 12-14-14 at 1.35V, 15-15-15 at 1.2V
12-14-14 at 1.35V15-15-15 at 1.2V - LED Lighting
- No
Specific References
- EAN13
- 740617244397
Comments (0)
No customer reviews for the moment.
HyperX HX424C12SB2K2/16 is a kit of two 1G x 64-bit (8GB) DDR4-2400 CL12 SDRAM (Synchronous DRAM) 2Rx8, memory modules, based on sixteen 512M x 8-bit FBGA components per module. Total kit capacity is 16GB. Each module supports Intel® XMP (Extreme Memory Profiles). Each module has been tested to run at DDR4-2400 at a low latency timing of 12-14-14 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP - 2.5V Typical
- VDDSPD = 2.25V to 3.6V
- On-Die termination (ODT)
- 16 internal banks; 4 groups of 4 banks each
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Height 1.36” (34.57mm)