- Online only
- Out of stock
Kingston 4GB, DDR4, 2666MHz (PC4-21300), CL19, DIMM Memory
£18.39
VAT included
This document describes ValueRAM's KVR26N19S6/4 is a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 8 internal banks; 2 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free
KVR26N19S6/4
Data sheet
- Warranty
- Lifetime
- Form Factor
- DIMM
- DDR Type
- DDR4
- Package Type
- Retail
- Package Weight
- 0.0225 kg
- Heatsink
- No
- Series
- Kingston ValueRAM
- Size
- 1 x 4GB
- Speed
- 2666 MHz
- Compliance
- PC4-21300
- Pins
- 288-pin
- CAS Latency
- CL19
- Data Integrity Check
- Non-ECC
- Voltage
- 1.2V
- Additional Information
- See Overview
- Timings
- 19-19-19
- Capacity
- 4GB
- LED Lighting
- No
- Individual Module Size
- 4GB
- Total Capacity
- 4GB Total
- RGB
- No
Comments (0)
No customer reviews for the moment.