ANTEC Performance 1 FT Gaming Case, White, E-ATX Full Tower, 2x USB 3.0, 1x USB Type-C 10Gbps, Temperature Display, 4mm Tempered

Temperature Display
By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.
The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.
Attention: The Antec iUnity software must be installed.

4mm Tempered Glass Side Panel
Both side panels adopt tempered glass for better PC showcase visual effects.

Cable Management on Point
2 cable covers are included for beautifying the cable management area.

Storm T3 PWM Fan
3 x Storm T3 140mm PWM Fans at the Front.
1 x Storm T3 120mm PWM Fan at the Rear.

Storm T3 PWM Fan
The Storm T3 Fan of 30mm thickness comes with thicker and longer fan blades, efficiently increasing the air intake.
The PWM function easily reaches the balance between cooling and silence.

Exquisite Steel Mesh
The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.


Attention: The Antec iUnity software must be installed.

ANTEC iUnity
The Antec iUnity provides instant data on PC specs, loads, and usage.
I/O Panel
Including the mainstream Type-C(10Gbps) port for high-speed transfer
Included dust plugs for dust prevention.
Mic/Audio 2-in-1 port.

PC SHOWCASE
4mm Tempered Glass Side Panel
Both side panels adopt tempered glass for better PC showcase visual effects.

EVERYTHING ORGANIZED
Cable Management on Point
2 cable covers are included for beautifying the cable management area.
There are ten sets of velcro straps for easy cable management.
1
Three sets of velcro straps for fan & I/O cable routing.
2
Five velcro straps for hardware and power supply cables.
3
Two velcro straps at the rear for rear I/O cable routing.
Easy Installation
Removable Top Cooling Bracket.

PRE-INSTALLED 4 FANS OF 30MM THICKNESS
Storm T3 PWM Fan
3 x Storm T3 140mm PWM Fans at the Front.
1 x Storm T3 120mm PWM Fan at the Rear.

COOLING COMPATIBILITY
Storm T3 PWM Fan
The Storm T3 Fan of 30mm thickness comes with thicker and longer fan blades, efficiently increasing the air intake.

The PWM function easily reaches the balance between cooling and silence.

BEST DUST PREVENTION DESIGN
Exquisite Steel Mesh
The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.

Best Airflow Path for GPU Cooling
Airflow-enhancing mesh front panel provides massive air.
Ample mesh at the bottom with fans (optional) on the meshed PSU shroud provides the best performance for the GPU cooling

Modular Drive Trays
Supports up to 5 drives: 2 removable drive trays for 3.5" HDD/2.5" SSD & 3 drive trays for 2.5" SSD.

Core Chassis Specifications
Case EditionPerformance 1 White
Case Form FactorFull Tower
Motherboard Form Factor
ATX
E-ATX
MicroATX
Mini-ITX
I/O, Bays & Expansion
Front/Side/Top Panel I/O
1 x Headphone/Mic Combo
1 x Power Button
1 x Reset Button
2 x USB 3.0
1 x USB Type-C
Drive Bays2 x 3.5" / 5x 2.5" Internal
Standard Expansion Slots8
Vertical Expansion Slots

Fans & Filters
Fan Bays10 x 120mm / 6x 140mm
Fans Included
1 x 120mm
3 x 140mm
Fan Controller/Hub
Dust Filters
Bottom
Front
Top
Liquid Cooling Support
Front Radiator Compatibility1 x 120/140/240/280/360/420mm
Top Radiator Compatibility1 x 360mm
Bottom Radiator Compatibility
Rear Radiator Compatibility1 x 120mm
Side Radiator Compatibility

Clearances
Max CPU Cooler Height175 mm
Max GPU Card Length400 mm
Cable Routing Space
Side Panels
Window/sYes
Window Configuration1 x Main Side
Window ConstructionTempered Glass
LED Lighting Functionality
LED LightingNo
LED Lighting Emitters
LED Lighting Colour
LED Lighting Support & Control

Power Supply Compatibility
PSU IncludedNo
PSU Wattage (If Included)
PSU 80+ Rating (If Included)
PSU Support
PSU Mounting Location
Max PSU Length440 mm

Chassis Physical Specifications
ColourWhite
Chassis Construction MaterialsSteel
Dimensions230 x 522 x 522 (WxHxD mm)
Weight12.55 kg (Approx)