- Out of stock
TP-LINK (TL-WA901NDV5) 450Mbps Wireless N Access Point, Detach. Antennas, Multi-mode - Client, Universal/ WDS Repeater, Wireless Bridge
£31.74
VAT included
TL-WA901ND
- 450Mbps wireless transmission rate, brings smooth wireless N experience
- Supports multiple operating modes: Access Point, Client, Universal/ WDS Repeater, Wireless Bridge
- Easily setup a WPA-PSK/WPA2-PSK encrypted secure connection at a push of the WPS button
- Up to 30 meters (100 feet) of flexible deployment with included Power over Ethernet Injector
What This Product Does
The TP-LINK Wireless N Access Point TL-WA901ND is designed to establish or expand a scalable high-speed wireless N network or to connect multiple Ethernet enabled devices such as game consoles, digital media adapters, printers, or network attached storage devices to a wireless network. The AP supports a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or with any other application that you may wish to use.
Wireless N Speed & Range
Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through three antennas with smart antenna technology to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not!
Multiple Operating Modes - Easy to Build WLAN
Supports AP Client, Bridge, Repeater and AP operation modes to enable various wireless applications to give users a more dynamic and comprehensive experience when using your AP. Multiple operating mode also helps you easily build wireless network for hard-to-wire locations or eliminating wireless dead zone.
Passive PoE Supported-More Flexible Deployment
The TL-WA901ND is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.
WPS
Instantly setup Wi-Fi connections simply by pressing the "WPS" button with Utility
Easy Setup
A friendly user interface utility on a CD for simple installation
TL-WA901ND
- 450Mbps wireless transmission rate, brings smooth wireless N experience
- Supports multiple operating modes: Access Point, Client, Universal/ WDS Repeater, Wireless Bridge
- Easily setup a WPA-PSK/WPA2-PSK encrypted secure connection at a push of the WPS button
- Up to 30 meters (100 feet) of flexible deployment with included Power over Ethernet Injector
What This Product Does
The TP-LINK Wireless N Access Point TL-WA901ND is designed to establish or expand a scalable high-speed wireless N network or to connect multiple Ethernet enabled devices such as game consoles, digital media adapters, printers, or network attached storage devices to a wireless network. The AP supports a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or with any other application that you may wish to use.
Wireless N Speed & Range
Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through three antennas with smart antenna technology to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not!
Multiple Operating Modes - Easy to Build WLAN
Supports AP Client, Bridge, Repeater and AP operation modes to enable various wireless applications to give users a more dynamic and comprehensive experience when using your AP. Multiple operating mode also helps you easily build wireless network for hard-to-wire locations or eliminating wireless dead zone.
Passive PoE Supported-More Flexible Deployment
The TL-WA901ND is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.
WPS
Instantly setup Wi-Fi connections simply by pressing the "WPS" button with Utility
Easy Setup
A friendly user interface utility on a CD for simple installation
TL-WA901ND
Data sheet
- Warranty
- 3 Years
- Package Type
- Retail
- Package Weight
- 0.6700 kg
- Type
- Access Point
- Power Supply
- 12VDC/1A
- Interface(s)
- 1 x 10/100M Ethernet Port(RJ45)Support Passive PoE
- Package Contents
- Wireless Access Point TL-WA901ND3 Detachable Omni Directional AntennasPower Supply UnitPoE Power InjectorResource CDQuick Installation Guide
- Power Consumption
- 5.8W
- Wireless Functions
- Enable/Disable Wireless Radio;WMM (Wi-Fi Multimedia)Wireless MAC Address FilteringWireless StatisticDomain Login Function
- Wireless Security
- 64/128/152-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK
- Dimensions (W x D x H)
- 94.82 x 129.93 x 36.2 mm
- Dual Band
- No
- Antenna
- 3 x 5dBi Detachable Omni Directional (RP-SMA)
- Dimensions ( W x D x H )
- 94.82 x 129.93 x 36.2 mm
- Max Signal Rate
- 450 Mbps
- Wireless Standards
- IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
- Button(s)
- WPS/Reset, Power On/Off
- Management
- SNMP
- Frequency
- 2.4-2.4835GHz
- Wireless Modes
- Access Point /Repeater (Range Extender)/ Bridge with AP/ Client/Multi-SSID
- Advanced Functions
- Up to 30 meters PoE is supported
- Weatherproof
- No
- Reception Sensitivity
- 270M: -68dBm@10% PER130M: -68dBm@10% PER108M: -68dBm@10% PER54M: -68dBm@10% PER11M: -85dBm@8% PER6M: -88dBm@10% PER1M: -90dBm@8% PER
- Quality of Service
- WMM
- DHCP
- DHCP Server
- Primary Function
- Access Point
- Access Point Mode
- Yes (Access Point Mode)
- Range Extender Mode
- Yes (Range Extender Mode)
Specific References
- EAN13
- 6935364091736
Comments (0)
No customer reviews for the moment.
TL-WA901ND
- 450Mbps wireless transmission rate, brings smooth wireless N experience
- Supports multiple operating modes: Access Point, Client, Universal/ WDS Repeater, Wireless Bridge
- Easily setup a WPA-PSK/WPA2-PSK encrypted secure connection at a push of the WPS button
- Up to 30 meters (100 feet) of flexible deployment with included Power over Ethernet Injector
What This Product Does
The TP-LINK Wireless N Access Point TL-WA901ND is designed to establish or expand a scalable high-speed wireless N network or to connect multiple Ethernet enabled devices such as game consoles, digital media adapters, printers, or network attached storage devices to a wireless network. The AP supports a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or with any other application that you may wish to use.
Wireless N Speed & Range
Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through three antennas with smart antenna technology to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not!
Multiple Operating Modes - Easy to Build WLAN
Supports AP Client, Bridge, Repeater and AP operation modes to enable various wireless applications to give users a more dynamic and comprehensive experience when using your AP. Multiple operating mode also helps you easily build wireless network for hard-to-wire locations or eliminating wireless dead zone.
Passive PoE Supported-More Flexible Deployment
The TL-WA901ND is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.
WPS
Instantly setup Wi-Fi connections simply by pressing the "WPS" button with Utility
Easy Setup
A friendly user interface utility on a CD for simple installation