• Out of stock
Kingston 4GB, DDR3, 1333MHz (PC3-10600), CL9, DIMM Memory, Single Rank
search
  • Kingston 4GB, DDR3, 1333MHz (PC3-10600), CL9, DIMM Memory, Single Rank
  • Kingston 4GB, DDR3, 1333MHz (PC3-10600), CL9, DIMM Memory, Single Rank
  • Kingston 4GB, DDR3, 1333MHz (PC3-10600), CL9, DIMM Memory, Single Rank
  • Kingston 4GB, DDR3, 1333MHz (PC3-10600), CL9, DIMM Memory, Single Rank
  • Kingston 4GB, DDR3, 1333MHz (PC3-10600), CL9, DIMM Memory, Single Rank
  • Kingston 4GB, DDR3, 1333MHz (PC3-10600), CL9, DIMM Memory, Single Rank
  • Kingston 4GB, DDR3, 1333MHz (PC3-10600), CL9, DIMM Memory, Single Rank

Kingston 4GB, DDR3, 1333MHz (PC3-10600), CL9, DIMM Memory, Single Rank

£30.65
VAT included
Stock status: Out of stock
Out of stock

4GB 1Rx8 512M x 64-Bit PC3-10600 CL9 240-Pin DIMM

ValueRAM's 512M x 64-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory module, based on eight 512M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers. 
 
 
Features
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 667MHz fCK for 1333Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration: Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB: Height 0.740” (18.75mm), single sided component
Quantity
Out of stock

4GB 1Rx8 512M x 64-Bit PC3-10600 CL9 240-Pin DIMM

ValueRAM's 512M x 64-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory module, based on eight 512M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers. 
 
 
Features
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 667MHz fCK for 1333Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration: Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB: Height 0.740” (18.75mm), single sided component
KINGSTON
KVR13N9S8/4

Data sheet

Warranty
Lifetime
Form Factor
DIMM
DDR Type
DDR3
Package Type
Blister Pack
Package Weight
0.0225 kg
Heatsink
No
Series
Kingston ValueRAM
Size
1 x 4GB
Speed
1333 MHz
Compliance
PC3-10600
Pins
240-pin
CAS Latency
CL9
Data Integrity Check
Non-ECC
Voltage
1.5V
Additional Information
Single rankUnbuffered
Capacity
4GB
LED Lighting
No
Individual Module Size
4GB
Total Capacity
4GB Total
RGB
No

Specific References

EAN13
0740617207620
Comments (0)
No customer reviews for the moment.