- Out of stock
HyperX Predator 8GB, DDR4, 3000MHz (PC4-24000), CL15, XMP 2.0, DIMM Memory
£72.69
VAT included
HyperX HX430C15PB3/8 is an 1G x 64-bit (8GB) DDR4-3000 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-3000 at a low latency timing of 15-17-17 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
Features
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP - 2.5V Typical
• VDDSPD = 2.25V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.661” (42.20mm)
Description
Specification
- Series: Kingston HyperX Predator
- DDR Type: DDR4
- Size: 8GB
- Speed: 3000 MHz
- Compliance: PC4-24000
- Pins: 288-pin
- CAS Latency: CL15
- Data Integrity Check: Non-ECC
- Low Voltage: No
- Voltage: 1.35 V
- Timings: 15-17-17-36
- Heatsink: Yes
- Heatsink Details: Aluminium heat spreader
- Additional Information: See Overview
- Package Type: Retail
- Package Weight: 0.1800 kg
- Warranty: Lifetime
HX430C15PB3/8
Data sheet
- Warranty
- Lifetime
- DDR Type
- DDR4
- Package Type
- Retail
- Package Weight
- 0.1800 kg
- Heatsink
- Yes
- Series
- Kingston HyperX Predator
- Size
- 8GB
- Speed
- 3000 MHz
- Compliance
- PC4-24000
- Pins
- 288-pin
- CAS Latency
- CL15
- Data Integrity Check
- Non-ECC
- Low Voltage
- No
- Voltage
- 1.35 V
- Additional Information
- See Overview
- Timings
- 15-17-17-36
- Heatsink Details
- Aluminium heat spreader
Specific References
- EAN13
- 740617268362
Comments (0)
No customer reviews for the moment.
HyperX HX430C15PB3/8 is an 1G x 64-bit (8GB) DDR4-3000 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-3000 at a low latency timing of 15-17-17 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
Features
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP - 2.5V Typical
• VDDSPD = 2.25V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.661” (42.20mm)